Field Petroleum Engineer
This is a candidate registered on Gulfoilandgas.com. To contact this candidate you need to purchase a subscription.
|Experience: 5 years
|Relocation: Yes - Internationally
|To Excel in my Profession, give my employer the best of my creative
Ability and make a positive impact in my Chosen field
|2003- Till Date: Department Of Petroleum Resources. (DPR), Port Harcourt Zonal
Petroleum Engineer: Carrying out both static and dynamic measurement on storage
Tanks before and during export. Computation of certificate of quantity figures for
Export, clearing of the export tanker, Custody transfer at the terminal and general
Loss control of crude oil at the terminals. Analysis of crude sample for
Export, Monitoring of activities on the FPSO from the central control room (CCR).
Witnessing of storage tank calibration and certifying it, prover loop calibration,
Proving of flow meters at custody and tie in points. Determination of technical
Allowable for producing firms based on welltest parameters supplied from the oil
Fields. Witnessing of MER test on wells and general producing wells surveillance.
2000-2002: Laser Geosciences Nigeria Ltd.
Reservoir Engineer: Analysis of well test data for SPDC, Mobil and Total for their
Reservoir and presentations of report. Estimation of Oil reserves and the calculation
Of recovery factor for these reservoirs. Determine the appropriate infill wells from
Simulation studies on these reservoirs and also to determine the optimal gas injection
Rate of each well for pressure maintenance. Building of reservoir models for Shell
Petroleum development Company (SPDC) selected fields using WINBOAST II
2006-Till Date: MBA in Oil and Gas Management, The centre for Energy,
Petroleum and Mineral Law and Policy (CEPMLP), University Of Dundee.
The MBA is aim at exposing candidates to what the need to know in terms of
Law, business, regulation and contracts in the oil industry. It brings about the
Understanding of the business aspect in the oil industry through practical
Applications underpinned by relevant academic theory.
1994 -1999: University Of Port Harcourt, Rivers State.
B.Eng: Petroleum Engineering. ?§Minimizing of water cut in producing wells?¨.
The research involved the diagnosing of the source of excessive water production
In oil wells using a log-log plot of the water oil ratio derivative against production
Time in years and the proposing of optimal water control strategy.
|Member, Society of Petroleum Engineers (SPE)
„« Oyom, A.E (1999) ?§Drilling Deep Wells with Water Base Mud, An alternative to oil
Base system?¨ seminar presented to the Department Of Petroleum
Engineering, University of Port Harcourt. Port Harcourt.
„«Oyom, A.E (1999) ?§Failure of Horizontal wellbore?¨ Proposal paper presented to the
Department of Petroleum Engineering, University of Port Harcourt. Port Harcourt.
„«Oyom, A.E (2000)?¨Minimizing of water cut in producing wells?¨ B.Eng Project,
Department Of Petroleum Engineering, University of Port Harcourt. Port Harcourt
I have extensive experience in application software like Ms excel, words, power point
And access. I write programmes in C++, Visual basic and C#.