Gulf Oil and Gas accountACCOUNT

certified nace coating inspector/engineer level2

This is a candidate registered on To contact this candidate you need to purchase a subscription. Go to Recruitment Products >>
Education: 4
Experience: 12 years
Relocation: Yes - Internationally

Industry Experience
12 years Quality Control/Quality Assurance Engineer

Career Objective

A job in the field of Protective Coating Application that requires experience & knowledge in: Engineering, Quality Control, Quality Assurance, Specifications, Standards, Coating Oil, Gas and Marine Structures, Offshore & Onshore

Professional Experience

• 1997 till Sep. 2005
Coating & painting engineer for supervision and inspection for blasting and painting department PETROJET Company CONSRTUCTION
Egypt since 1997 till Sep. 2005 for the following projects:
Since Oct.2005 till march2006
Project : Coating of 16" and 8” SAQQARA Project
• Since july2003 till june2005
Project : Temsah, Barboni, Baltim, Temsah-NW-2 platforms
Since May.2002 till june2003
Project : Nouras “A“ , “B“ Monopods and Nouras Plem.
since Jan.2002 till Dec. 2002
Project : Stolt plets, stolt plem - I & II
Since Sep.2002 till DECEMBER 2002
Project : Platform “ C “ and Platform “ A “ Modifications
- SINCE NOV.2001 TILL JUN. 2002
Project : West akhen platform
Since Aug.2000 till Oct.2001
Project : Temsah North west Platform.
Since Oct.1999 Till Sep.2000
Project : Port fouad south wast 1,2 and PFSW-2 protection cague
Since Apr.1999 till Feb.2000
Project : HA’PY Platform.
Since Jan.1999 till jun.2000
Project : Rossetta - 1 and Rossetta Tie-In
Since dec.1998 till jan. 2000
Project : Pool “ v “ – karrous monopod and port fouad south east-1.
Since AUG.1998 till FEB.1999
Project : Jacket October flare.
Since Jan.1999 till june 1999
Project : Marine Units Maintenance
Since SEP.1997 till AUG.1998
Project : ABU-KIR phase(3)plant
• Oct. 2005 till march2006
Coating inspector (Gupco Co.) for complete coating of 16" and 8" pipe line with 3LPP and Concrete coating Port Said Coating Plant – Egypt
• March2006 till june2006
Senior coating inspector khrsaniah project(KPF) in ARABIA SAUDIA repersenting CCC company for ARAMCO project
• July2006 till August2006
Painting supervisor in offshore job located in NIGERIA with TRANSOCEAN CO. (RIG NAME: TRIDENT4)
• August2006 till AUGUST2007
Senior painting and coating inspector for KHARAFI NATIONAL CO. in KUWAIT AS:
1- Senior coating inspector for internal lining for ductile pipes for Egaila pumping station
2- Senior coating inspector for aromatic complex project for KNPC
• NOVEMBER 2007 UP TO JAN 2008
• FEB 2008 UP TO JULY2009
Painting QC engineer in ccc qattar GTL RASLAFAN PROJECT


1995 B.Sc Chemical Engineering (5 years degree) – Alexandria University – Egypt
Training Courses & Professional Recognition
2003 BGAS/CSWIP LEVEL3 NO:539102
FEB2007 NACE CIP session I – KUWAIT NO:14477
NOV2007 NACE CIP session II – EGYPT NO:14477


1995 B.Sc Chemical Engineering (5 years degree) – Alexandria University – Egypt
Training Courses & Professional Recognition
2003 BGAS/CSWIP LEVEL3 NO:539102
FEB2007 NACE CIP session I – KUWAIT NO:14477
NOV2007 NACE CIP session II – EGYPT NO:14477

Additional Information

1. The Quality Control tasks, that includes:
Witnessing and carrying out the checks accompanied with pre-application, application e.g. surface preparation, climatic conditions, materials preparation, after application checks, marking areas of defects and assurance of repair compliance, validity of equipment and materials storing conditions,…etc.
and reporting activities through daily / weekly technical reports.
2. Preparing Recording the daily work schedule and the weekly work plan, that includes man power, equipment, materials, and working hours, liaison affiliated parties e.g. subcontractors, suppliers, construction etc.
3. Study of client’s specifications and developing the technical procedure according to the standards and requirements specified, attending the pre-job conference and the periodical meetings along with the project, technical submittals to/from concerned parties.
4. Carrying out evaluation tests for the coating systems proposed by suppliers for a new project, that includes review of products data sheets, carrying out actual site application of products, evaluating quality and performance of coating systems through site and laboratory tests as per standards specified, assessment of a supplier compatibility for registering to client’s vendor list.
5. Carrying out tests of final acceptance.

Hot Categories

Oil Treating & Refining Petrochemicals Ball valves Gate Valves Butterfly Valves Gas Processing Natural Gas Blowers Control Valves Fire Hydrant Oil & Gas Companies Exploration Transport of Hydrocarbons Production Ecological & Environmental Oil and Gas Pipeline Oil Field Services

Are you Hiring?

Reach the right candidates to fill your technical positions with Gulfoilandgas Jobs »
Technical Recruitment
Our Career Center has 70,000+ resumes for employers to search »
200-Engineering Hydrostatic Testing » News » Inspection » News » Laboratory Services » News » Non Destructive Testing » News » Testing » News » Testing & Inspection Services » News »
Mechanical Engineer
Field Engineer
Quality Control/Quality Assurance Engineer
Environmental Health & Safety Associate
Electrical Engineer

Field Service Technician
Information Systems/Technology
Construction Engineer
Civil Engineer
Assistant Manager
Purchasing Management
Chemical Engineer
Project Engineer

Customer Service
Process Engineer
Control Engineer
Project Manager
Computer Systems Analyst
Engineering Management
Operations Manager
Marketing/Sales Manager
Construction Technician
Plant Engineer
Consulting Engineer
Maintenance Manager
Gulf Oil and Gas
Copyright © Universal Solutions All rights reserved. - Privacy Policy.