mechanical engg. graduate with one year of experience.
This is a candidate registered on Gulfoilandgas.com. To contact this candidate you need to purchase a subscription.
Experience: 1 years
Relocation: Yes - Internationally
Seeking entry level challenging job assignments in Petrochemical sector with a growth oriented organization of high repute.
Worked for HV Transmission Ltd, Tata Motors, Jamshedpur for 1 year in the Planning Department as trainee engineer.
Carrying out turnkey projects for the procurement of machines and Equipments.
Preparation of technical Data Sheet for the procurement of machines and material handling equipments.
Doing technical and commercial comparison between different suppliers.
Negotiation with different suppliers, making ESR, releasing PO, follows up with the supplier, Installation & Commissioning of the machine and Equipment.
Calculation of capacity gap by calculating the present and proposed capacity and subsequently planning for the required capacity.
Carried out the turnkey projects for the Automatic number punching equipment on the finished Gear Boxes and procurement of Induction Heating furnace.
Assisted in the project of Bar Coding Equipment for the Gear Boxes.
Carried out the project of Reconditioning of Gear Hobbing Machine by COTMAC, PUNE.
Procurement of material handling equipment from PARI.
Installation & Commissioning of several machines like TAKISAWA hard Turning Lathe, REISHAUR Gear grinding machine, NIGATA HMC, swaging machine, Gleason Hurth Gear shaving machine, Gear Tooth Chamfering machine.
Team member for the Asset verification of HV Transmission Ltd.
Successfully auctioned over 100 scrapped machines of HVTL under scrap disposal programme.
B.E. (Mechanical Engineering)
Priyadarshini College of engineering, Nagpur, in 2010 with68.5 % marks.
Indo Danish Tool Room, Jamshedpur in 2007 with 83% Marks.
Karim City College, Jamshedpur in 2003 with 61% marks.
Mithila High School, Jamshedpur in 2001 with 59.5% marks.
Piping design and management system (PDMS),ANSYS 10, AutoCAD-2006, Catia-V5, Pro Engineer, Unigraphics.
Academic Projects Handled
B.E. (Mechanical Engineering)
Title : Development of Solar Spray machine.
Description : This system is proposed to assist the farmers in the field of agriculture to spray the liquid pesticides and insecticide powders in the field. It is meant for reducing the human fatigue and saving conventional source of energy.
Tools Used : Solar Panel, Blower, nozzle, motor, Batteries etc.
Mini Projects & Assignments
Title : A Working Model of Automated Conveyor System for Counting of the Objects.
Description : The objects that travel on the conveyor are being detected by an IR emitter- receiver pair,
which sends the electrical pulse to the microprocessor interfaced with it. The microprocessor
on receiving pulse, increments the output value by one and this output is displayed on a
Diploma (Mechanical Engineering)
Title : 1) Manufacturing of Mould for “Coupling Adaptor”.
2) Manufacturing of Press Tool for “Mosquito Coil Stand”
3) Team member in the manufacturing of Jig and Press Tool for M/s Cordoba Engineering Ltd, Jamshedpur.
Oil Treating & Refining
Surge Vessel - Bladder Type
Surge Vessel - Compressor Type
Oil & Gas Companies
Transport of Hydrocarbons
Ecological & Environmental
Oil and Gas Pipeline
Sourcing & Procurement
Health, Safety and Environment