Gulf Oil and Gas accountACCOUNT
Centrifugal Pump with Motor & Base Plate
Pumps: Centrifugal
Reference 3629/2011
Date 7/24/2011
Location Middle East
Scope ITEM- 1 -
Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition.
QTY: - 4 NOS

Operation condition of pump
Liquid Gasoline
Flow 25 m3/hr
Pumping temperature 60 co
Sp.Gr @ p. T 0.7
Disch. Press 4 kg / cm2
Suct. Press Atmosphere
NPSH available 2 m
VAP Press 0.8

Nozzle: Suction / Size: 3 " / Postion: End
Nozzle: Discharge / Size: 1.1/2 " / Postion: Top

Material Cod
Material of pump shall be manufactured according to API 610 table H1
Material class C6.

Motor Driver
R.P.M: 2950
Volt / Phase / cycles: 380 / 3 / 50
Explosion proof: EEXD 11 CT4
IP: 55
Motor manufacturer: should be from one of the following:-
(Siemens, Schorch, ABB, Brook) and from origin (West European USA)

Scope of Supply for Each Unit
1. Pump shall be manufactured according (API610).
2. Bearing should be antifriction ball bearing ring lubricated type.
3. Flange pump drains.
4. Flexible metastream coupling dynamically balanced between pump and motor.
5. Non-sparking coupling guard.
6. Single mechanical seal according to (API 682).
7. Mechanical seal manufacturer: John crane or Eagle Burgmann.
8. Fabricated steel base plate.
9. Centerline case-mounting.
10. Standard documentation including operation and maintenance manuals in English.
11. The pump manufacturer should be from one of the following:- (Union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir).
12. Pump manufacturer should be (USA, West European)

ITEM- 2-
Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition.
QTY: - 4 NOS

Operation condition of pump
Liquid Kerosen
Flow 25 m3/hr
Pumping temperature 60 co
Sp.Gr @ p. T 0.75
Disch. Press 4 kg / cm2
Suct. Press Atmosphere
NPSH available 2 m

Nozzle: suction / Size: 3 " / Postion: end
Nozzle: Discharge / Size: 1.1/2 " / Postion: Top

Material cod
Material of pump shall be manufactured according to API 610 table H1 material class C6.

Motor Driver
R.P.M: 2950
Volt / Phase / cycles: 380 / 3 / 50
Explosion proof: EEXD 11 CT4
IP: 55
Motor manufacturer: should be from one of the following:- (Siemens, Schorch, ABB, Brook) and from origin (West European USA)

Scope of Supply for Each Unit
1. Pump shall be manufactured according (API610) .
2. Bearing should be antifriction ball bearing ring lubricated type.
3. Flange pump drains.
4. Flexible metastream coupling dynamically balanced between pump and motor.
5. Non-sparking coupling guard.
6. Single mechanical seal according to (API 682).
7. Mechanical seal manufacturer: John crane or Eagle Burgmann.
8. Fabricated steel base plate.
9. Centerline case-mounting.
10. Standard documentation including operation and maintenance manuals in English.
11. The pump manufacturer should be from one of the
Following :- (union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir).
12. Pump manufacturer should be (USA, West European)

ITEM- 3-
Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition.
QTY: - 2 NOS

Operation condition of pump
Liquid Diesel oil
Flow 25 m3/hr
Pumping temperature 60 co
Sp.Gr @ p. T 0.81
Disch. Press 4 kg / cm2
Suct. Press Atmosphere
NPSH available 2 m

Nozzle: Suction / Size: 3 " / Postion: End
Nozzle: Discharge / Size: 1.1/2 " / Postion: Top

Material Cod
Material of pump shall be manufactured according to API 610 table H1 material class C6.

Motor Driver
R.P.M: 2950
Volt / Phase / cycles: 380 / 3 / 50
Explosion proof: EEXD 11 CT4
IP: 55
Motor manufacturer: should be from one of the
Following :- (Siemens, Schorch, ABB, Brook) and from origin (West European USA)

Scope of Supply for Each Unit
1. Pump shall be manufactured according (API610).
2. Bearing should be antifriction ball bearing ring lubricated type.
3. Flange pump drains.
4. Flexible metastream coupling dynamically balanced between pump and motor.
5. Non-sparking coupling guard.
6. Single mechanical seal according to (API 682).
7. Mechanical seal manufacturer: John crane or Eagle Burgmann.
8. Fabricated steel base plate.
9. Centerline case-mounting.
10. Standard documentation including operation and maintenance manuals in English.
11. The pump manufacturer should be from one of the following: - (union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir).
12. Pump manufacturer should be (USA, West European)

Bidding Information

Bid Bond 1% from Submitted Prices
Offer Validity 120 days
Documents Price ID 150 000
Pumps: Centrifugal
Related Prooducts: Pumps: Centrifugal Axial Flow Pump Deep Well Pumps Fire Certified Pump, Portable & Wheeled Fire Certified Pump, Skid mounted General High Pressure Pumps Horizontal Centrifugal End Suction Pumps Horizontal Split Case Pumps Hydraulic Pumps In-Line Pumps Magnetic Coupled Mixed Flow Pump Mud Pumps Multistage Horizontal Centrifugal Plastic Pumps Self Priming Pumps Slurry Pumps Submersible Pumps Vacuum Pumps Vertical Centrifugal Pump Vertical Pumps w/ Cardan Shaft Vertical Split Case Pumps Vertical Submerged Pumps
Related Tenders: Fire Certified Pump, Portable & Wheeled Fire Certified Pump, Skid mounted General High Pressure Pumps Horizontal Centrifugal End Suction Pumps Horizontal Split Case Pumps Hydraulic Pumps Mud Pumps Self Priming Pumps Submersible Pumps Vacuum Pumps Vertical Centrifugal Pump

Related Articles

For Buyers
Advertise your Purchasing Requests

For Suppliers
Promote your Products
Gulf Oil and Gas
Copyright Universal Solutions All rights reserved. - Privacy Policy.