Reference: 4320/2012 5/24/2012, Location: Middle East
Category: Site Survey
Scope of Work
Contractor/ Fast-loop analysis Manufacturer’s engineering work shall include the
1 . Site Survey shall be done by the contractor to choose the adequate location for the new fast-loop sampling and analysis systems
2 .Contractor shall make all installation for the 4th sampler units and any required piping or mechanical changes and also make the necessary change in the control panel for ABOT
.Contractor shall make all installation for the two sampler units and any required piping or mechanical changes and also make the necessary change in the control panel for
KAAOT
3 . Development of P&I Diagram to cover the new changes in the metering system .
4. Design / Fast-loop analysis system Skid to cover the requirement of work at ABOT ,
KAAOT
5 . Design of Fast-loop analysis system Cubicle (internal instrument arrangement, wiring, etc.). The Fast Loop analysis system is comprise of Power assisted mixer, grab sampling, B&SW and online Density. These sampling system is to fully comply to API 8.2 and ISO
6 .Contractor shall make any required updates to the software of Danpac system, S600
flow computers , and Omni flow computer .
7. All significant parts should be designed with Dual Redundancy in mind to insure that the sampling system is never off line.
|
