Reference: 28.12.5020.01/2012 6/25/2012, Location: Middle East
Category: Machine Tools
Scope of Work
Supply of different machines and equipments required by mechanical engineering department. Used for mechanical workshops section
Item 001 QTY=1, Bundle Saw Machine.
Item 002 Qty=2, Mig/Mag Welding Machine.
Item 003 Qty=2, Ac/Dc Tig Inverter Welding Machine.
Item 004 Qty=4, Plasma Cutting Machine
Item 005 QTY=4, Air Compresses.
Item 006 QTY=1, Crimping Hydraulic Hose.
As below specification: -
Item 001 Bundle Saw Machine
Band saw for the dismantling and recovery of heat exchanger tube bundles.
Scope of supply.
Cutting capacity:
Bundle diameter Max. D MAX: 3000 mm.
Bundle diameter Min. D MIN: 350 mm.
Tube sheet thickness Max. S MAX: 800 mm.
Cutting speed: 11-140 Mt/min.
Power supply 400 v, 3 ph, 50/60 Hz.
Saw blade type (10900× 54×1.6) mm or equivalent.
Associated with quick attaching gripper tube puller of the GRIPPUL series, facilitates and highly
Speed up to recovery of the tube sheets.
With quick hydraulic tube sheet locking device.
With spare parts (saw (200) No., belt (50) No., …etc).
Item 002 QTY=2, Mig/Mag Welding Machine.
Power Supply: 3 ph, 50HZ.
Current Setting: 60 – 400 A.
Duty Cycle at 100%... 230 A.
Duty Cycle at 60% ... 300 A.
Duty Cycle at 35%... 400 A.
Cooling Type: Air.
4 Wheel Trolley.
Wire Size: 0.6 – 1.6 mm.
Wire feed speed: 0.5 - 20 m/min
Feeder type : TR4
Torch type: C 350/4
With reducer and flow meter and heater
Cylinder rack
Equipped with power cord, work cable and clamp , regulator gas hose , drive roll kit
Drive rolls kits ( 0.9 - 1.0 - 1.2 mm) Set 2
Additional Air – cooled Mig Gum Nos. 1
Additional work cable and clamp ( 5 maters) Nos. 1
Tips of different size ( 0.9 - 1.0 - 1.2) mm Nos. 60
CO2 Filled Bottle Nos. 2
CO2 Regulator Nos. 1
( ER – 705 - 6) welding wire 30 rolls , 15 kg , Roll 10
( 10 of 0.9 mm, 10 of 1.0 mm and 10 of 1.2 mm)
Spare nozzles for the Mig Gum Nos. 10
Head welding helmets for each M/C Nos. 2
Item 003 QTY=2, Ac/Dc Tig Inverter Welding Machine.
Power Supply: 1- ph, 50HZ.
Current Setting: 5 - 200 A.
Duty Cycle at 100%... 110 A.
Duty Cycle at 60%... 130 A.
Duty Cycle at 30%...... 200 A.
Cooling Type: Air.
Item 005 QTY=2, 5-a Air Compresses.
Max pressure: - 20 bar.
Free air delivery: 20 lt/s.
Normal power range (10-15) kw.
Speed range (1500-1800) r/min.
5-b Air Compresses. Nos. 2
L trolleys are available with electrical motor .
Max pressure:- 20 bar.
Speed: 1800 rpm.
Free air delivery : 20.9 l/s.
Normal power : 15 kw, 20 hp.
Item 006 QTY=1, Crimping Hydraulic Hose.
Capacity (2") six –spirals (2"- 1/2") industrial hose.
340 tons of crimping force.
(5hp) 230v/3ph /50 HZ electric pump.
9 die sets included.
Cleaning and maintenance kit.
|
