|
Drilling Equipment >>
|
|
Sucker rod power tong XQ28/1.8Y: Pipe size range of master tong: 5/8''-1 1/8'' sucker rod, 1 7/8''-2 3/8''tubing; Pipe size range of the backup tong:5...
|
|
Sucker rod power tong XQ28/2.6Y: Pipe size range of master tong: 5/8''-1 1/8'' suck rod; Pipe size range of the backup tong:5/8''-1 1/8'' suck rod; Hi...
|
|
Tubing power tong XQ89/3YC: Pipe size range of master tong: 2 3/8''-3 1/2'' ; Pipe size range of the backup tong:2 3/8''-4 1/2'' ; High gear rated tor...
|
|
Master Bushings can be divided into three kinds of structure, hinged, solid or split. There are two kinds of driving way, pin and square. It is adapte...
|
|
SDD manual tongs are designed and manufactured in accordance with the API Spec 7K..Which is a useful tool applied to make up and break out drill pipes...
|
|
The DDZ type drill pipe elevator is a wellhead tool in the drilling and repairing of oil or gas well. It is easy and safe for handling 18-dregrees dri...
|
|
The Y Series Type Slip Elevators are hoisting tools for handling tubing, drill pipe, casing, electric submersible pump and other tubular goods in oil ...
|
|
CHD pneumatic spider is mainly utilized in the petrochemical industry to lock and hold drill pipe and oil pipe for well pulling the petrol oil and nat...
|
|
Cooperating with Rapid-Torc in U.S.A and TENTEC Ltd in U.K,HTS can offer all range of Hydraulic Torque Wrench.1.Square drive and hex drive;2.Output ac...
|
|
RSD/QW5 Air Slips: Used for the operation of in and out drill rod in drilling: The operation of in and out drill rod doesn’t need to change slips, whi...
|
|
JES Drill pipe slips accommodates drill pipe from 3-1/2" to 5 -1/2" in O.D. They are classified as type Short (SDS), Medium (SDML) and Extra Long (SDX...
|
|
Rotary Table is mainly used for: Rotating the drill rod in the process of the rotary table drilling or salvage. Bearing the torque reaction of the dri...
|
|
Tool joints, API 7-1 NC21-NC50
|
|
WQ Series Multifunctional pneumatic drill is used to slip in oil or gas drilling card holders drill pipe, drill collars or casing of a power kava, kav...
|
|
Tubing power tong XQ114/6YB: Pipe size range of master tong: 2 3/8''-4 1/2'' ; Pipe size range of the backup tong:2 3/8''-5 1/8'' ; High gear rated to...
|
|
Tubing power tong XQ140/12YA: Pipe size range of master tong: 2 3/8''-5 1/2'' ; Pipe size range of the backup tong:2 3/8''-6 1/8'' ; High gear rated t...
|
|
Drill pipe tong ZQ127/25Y: Pipe size range:2 3/8"-3 1/2" drill pipe, 3 1/2"-4 1/2" tubing and 4 1/2"-5 1/2" casing ; High gear rated torque: 3500N. M ...
|
|
Drill pipe tong ZQ203/100: Pipe size range of master tong:3 1/2"-8" drill pipe; High gear rated torque: 9500N. M (7007ft /lbs) ; Low gear rated torque...
|
|
Drill pipe tong ZQ203/125: Pipe size range of master tong:3 1/2""-8"" drill pipe; High gear rated torque: 10000N. M (7370ft /lbs) ; Low gear rated tor...
|
|
Casing tong TQ245/20Y: Pipe size range: 4 1/2'', 5'', 5 1/2'', 7'', 8 5/8'', 9 5/8''; High gear rated torque: 2600N. M@12Mpa (1924ft /lbs@1740psi) ; L...
|
|
Casing tong TQ340/35YA Pipe size range: 5 1/2'', 6 5/8'',7'', 8 5/8'', 9 5/8'',10 3/4'', 13 3/8''; High gear rated torque: 4800N. M@13.8Mpa (3540ft /...
|
|
Casing tong TQ508/70Y: Pipe size range: 9 5/8'',10 3/4'', 13 3/8'',16'',18 5/8'',20''; High gear rated torque: 10160N. M@17.3Mpa (7500ft /lbs@2500psi)...
|
|
Spinner 950H: Aplication pipe size: 2 7/8''--9 1/2''; Output torque range: 813-1690N.m(600-1250ft-lbs); Output torque speed range: 39-130rpm; Rated sy...
|
|
Hydraulic power unit (motor) YD160-7: Max working pressure: 2900 psi (20MPa); Rated flow rate: 42 GPM(160 L/min); Oil tank volume: 132 gal(560 L)
<...
|
|
Rated working pressure: 2320 psi (16 MPa); Maximum supply pressure: 2900 psi (20 MPa); Rated flow rate: 135L/min; Hydraulic oil tank volume: 520L; Fu...
|
|
ZQ203/100 drill power tong is a new type of mechanize tool on drilling floor. The tong is made of the upper tongs and low tongs. Open head design allo...
|
|
The series of power tongs are opening tongs, which are used for quickly make-up?break-out in well service operations. The tong is equipped with hydrau...
|
|
High wear resistance overlaying for drilling tools and equipments; Surfacing Materials include: Tungsten carbide composite Nickel Alloys Cobalt based ...
|
|
|
Related News
|
