Gulf Oil and Gas accountACCOUNT

Instrumentation Engineer (Control System)

This is a candidate registered on To contact this candidate you need to purchase a subscription. Go to Recruitment Products >>
Education: 4
Experience: 5 years
Relocation: Yes - Internationally

Industry Experience
2 years Electrical/Controls/Mechanical/Structural Eng
1 years Electrical/Controls/Mechanical/Structural Eng
1 years Electrical/Controls/Mechanical/Structural Eng

Career Objective

To Work in a challenging environment that provides me ample opportunities and aids me in professional and personal development besides establishing an outstanding career in Technology.

Professional Experience

I) Oil & Gas Plant Control System Design and Site Reaction Project:
For GASCO, HABSHAN (petro gas company in Abu Dhabi)

Company: FLUOR MIDEAST LIMITED. (From August 2007 to till date)
Post: Control System Design Engineer

Designing the field instruments wring to control station system for Loop Creation & Loop Generation, Modifying Instrument Datasheets and I/O Assignment for the System using in InTools software.
Making the Loop Checking Database from InTool Software, Managing the Loop Checking Team for loop testing with live application Panel.
System to system networking (IT works) in the cables and fiber optic technology, Hand on Experience in fiber optic panels and patch core cables,

II) Autopilot for Small-Scale UAVs Project:
For DRDO, CABS (center of air born section).

Company: Digital Coral Technology Research Center.(From Aug 2006 to Aug 2007)
Post: Control System Engineer

The design and implementation of a fully autonomous programmable autopilot system for small scale autonomous unmanned aerial (UAV) aircraft. This system was implemented in Reflection and has flown Exploration Aerial Vehicle (EAV) Project. Experience in software is Orcad layout & Electronic Workbench (for electronic simulation)

III) Chemical Plant Expansion Project:
Company: HTA Instrumentation Pvt.Lmt. (From July 2005 to august 2006)
Post: Instrumentation Design Engineer
Duties: Responsible for the design of instrument wring systems, calculations, specifications, loop sheets, P&IDs, MTO, etc. Preparation of design and maintenance manuals, loop studies for both pneumatic and electronic instrumentation involving process control DCS and ESD systems necessary to upgrade two gas treatment plants. Covering a wide variety of instrumentation from local loops to control systems.
Design work associated with the expansion project of a chemical plant: Preparation of specifications, control valve and orifice plate calculations, selection of materials, preparation of loop sheets, index sheets, material take off and vendor selection. Co-ordination between instruments, piping, electrical and process groups. Scheduling work, checking drawings and supervision of instruments.


B.E., Instrumentation Engineering July 2002 May 2005.
Aggregate: 68 %
M.A.M. College of Engineering, Anna University, Trichy, Tamil Nadu, INDIA.


Diploma in Instrumentation and Control Engineering May 1998 April 2001,
Aggregate: 81 %
Government Polytechnic State Board of Technical Education, Ooty Tamil Nadu, INDIA.


i) Steel Authority of India Limited (SAIL) Salem. - 2 Level
ii) Centre for Airborne Systems (CABS) - 4 Level
iii) DRDO, Ministry of Defiance, Bangalore - 4 Level
iv) Gas Turbine Range Engine (GTRE), DRDO - 3 Level
v) Ministry of Defiance, Bangalore - 4 Level

Additional Information


a) Contract Board design engineer & assembling, the ECB testing at TRICK system, Coimbatore, Tamil Nadu.
b) I have own lab for electronic project center for engineering students in Bangalore
c) Distributed Control System (DCS) networking Implementation at Lakshmi Mills, Coimbatore, Tamil Nadu.
d) DCS Implementation and CNC Machine installation through DCS at Ordnance Factory Trichy

Other Projects Undertaken

i) Title: General Purpose Micro-Controller based system

Description: This is a general purpose interfacing system. It has got two input and two output digital and analog channels (8 channels). The minimum and maximum value of each of the transducer and final control element should be given as input. This micro-controller based system is connected to the PC through RS-232 port. Predefined application software is written in VB. This project was done for a textile industry based on their requirement. This is my first trying for creating a PLC.

ii) Title: Process Controller for Textile Mill based PLC (own made)

Description: This controller is used to monitor the continuity of thread and temperature of the sweab and speed of the cloth coil motor and number of the stork also counted. Based on the above parameters on the mill, automatically the system shows the details on the system.

Hot Categories

Oil Treating & Refining Petrochemicals Natural Gas Ball valves Gas Processing Gate Valves Butterfly Valves Control Valves Fire Hydrant Globe Valves Oil & Gas Companies Exploration Transport of Hydrocarbons Production Oil and Gas Pipeline Ecological & Environmental Oil Field Services

Are you Hiring?

Reach the right candidates to fill your technical positions with Gulfoilandgas Jobs
Technical Recruitment
Our Career Center has 70,000+ resumes for employers to search
200-Engineering Consultants  News Design/construction/Engineering Graphics  News Engineering  News Engineering Services  News Production Engineering  News Project & Resource Management  News Training & Education  News
Mechanical Engineer
Field Engineer
Quality Control/Quality Assurance Engineer
Environmental Health & Safety Associate
Electrical Engineer

Field Service Technician
Information Systems/Technology
Construction Engineer
Civil Engineer
Assistant Manager
Purchasing Management
Chemical Engineer
Project Engineer

Customer Service
Process Engineer
Control Engineer
Project Manager
Computer Systems Analyst
Engineering Management
Operations Manager
Marketing/Sales Manager
Construction Technician
Plant Engineer
Consulting Engineer
Maintenance Manager
Gulf Oil and Gas
Copyright 2020 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.