Baker Hughes Commercializes Reconnect System

Source: 9/20/2010, Location: North America

Baker Hughes announced the commercialization of its Reconnect™ technology, which quickly and reliably restores surface control to subsurface safety valves, eliminating the need for more expensive or less reliable options. The Reconnect system was developed by BJ Services, a Baker Hughes company.

Baker Hughes’ Reconnect system provides a highly effective alternative for re-establishing surface hydraulic control to surface-controlled subsurface safety valves (SCSSV) that are inoperable due to compromised control lines or if the installation of a storm choke is undesirable. This technology is also a viable option for wells that were not completed with SCSSVs. The system includes a wireline-retrievable safety valve, a through-tubing replacement control line that stings into the new valve assembly and a wellhead adapter. Installation requires only a minimal crew and equipment suitable for almost any platform or wellsite.

SCSSVs are designed to stop flow in the event of a catastrophic failure. They are installed in the production tubing and are mandatory in most offshore wells and some land wells. Primary SCSSVs are held open by hydraulic pressure from a control line that runs through the annulus to the surface. If pressure in the control line is lost, such as during an emergency shutdown or if the line is cut, the valve will close and revert to its fail-safe closed position, stopping flow from the well. Historically, the only ways to regain surface control were to install a storm choke, which can be unreliable, or perform a costly workover intervention.

The new Reconnect system, which is approved by regulatory agencies such as the U.S. Bureau of Ocean, Energy Management, Regulation and Enforcement (BOEMRE), does not require a workover rig and uses reliable, field-proven capillary and safety valve technology to rapidly restore an important safety barrier with the same complete surface control as was originally designed into the well. “Damage to the hydraulic system of a surface-controlled subsurface safety valve can compromise the operation of this critical safety and environmental protection system,” says Derek Mathieson, president of products and technology for Baker Hughes. “The Reconnect system provides reliable, fail-safe protection for personnel, the environment and our customers’ well assets.”

Related Categories: Air Valves  Ball valves  Butterfly Valves  Check Valves  Christmas Tree/Wellhead Valves  Cone Valves  Control Valves  Diaphragm pilot control valves  Fire certified valves  Fire Hydrant  Gate Valves  General  Globe Valves  HP Butterfly Valves  IRIS Control valves  Knife Gate Valves  Metal Diaphragm Valves  Needle Valves  Pinch Tube Valves  Piston Pilot control valves  Piston Valves  Plastic Diaphragm Valves  Plastic Valves  Plug Valves  Pressure Relief Valves  Safety Valves  Sight Glass  Solenoid Valves  Steam Traps  Strainer  Valve Actuators  Valve Limit Switch  Valve Positioner 

Related Articles: Air Valves  Ball valves  Butterfly Valves  Check Valves  Christmas Tree/Wellhead Valves  Control Valves  Diaphragm pilot control valves  Gate Valves  General  Globe Valves  Knife Gate Valves  Needle Valves  Pressure Relief Valves  Safety Valves  Solenoid Valves  Steam Traps  Valve Actuators  Valve Positioner 

Gulf Oil and Gas
Copyright © 2021 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.