Sirius Shipping Invests in Onboard Online Monitoring

Source: www.gulfoilandgas.com 10/13/2017, Location: Europe

With ten vessels in its fleet, Sirius Shipping transports liquid media such as oil and chemicals to ports in Northern Europe. Its destinations are mainly in Denmark, Norway, Finland and Sweden. Delivering shipments on time, safely and, not least, in an environmentally sustainable manner are important factors that customers demand. An unscheduled stoppage in the engine room causes costly delays. That is why well-implemented maintenance is so important to ensure deliveries are made on time.

“Maintenance work is a continuous process on board. We go into the shipyard for planned stoppages, roughly once every 30 months. There we review everything that we can’t when the ship is in operation, such as inspecting the bottom, rudder, propeller, machine parts in the engine and gearbox,” explains Stefan Johansson.

Increasing reliability
A recurring challenge facing the maintenance department is to increase the reliability of critical rotating equipment on board. Monitoring the reduction gearbox, which drives the propeller shaft, and the generator, which is also driven by the reduction gearbox, increases the safety of the system.

- “Fortunately, we have done fairly well in avoiding major breakdowns. It is very costly if something happens, so we want to prevent the risks as much as we can,” says Stefan.

Costly stoppages
If an unplanned stoppage were to occur, the length of the stoppage would depend on where the ship was located at that time, the accessibility of a shipyard, and whether it was necessary to move the boat from the harbour to the shipyard. It is not unusual for an ordinary shipyard stoppage to take around 6-7 days. But with a major breakdown, the repairs can take several months, and that is something to be avoided as far as possible, according to Stefan Johansson.

“Usually the components need to be specially ordered. You can’t get hold of large gear wheels or bearings straight away, so it is important that we have a longer planning horizon in order to be able to order parts and reduce the length of maintenance stoppages,” says Stefan.

In order to increase control of rotating equipment, the shipping company has chosen to install online status monitoring with measurement sensors for selected machine components. The Nimbus and Marinus vessels are the first to have this installed. Soon IMx-8 will also have been installed aboard the Neptunus and Scorpius vessels.

The choice of system fell on SKF’s IMx-8, the latest addition to the IMx range. This is a compact system that offers sophisticated functions taken from its bigger brothers, IMx-16 and IMx-32. The easy-to-assemble and compact system fits into Sirius Shipping’s maintenance system. Sensors detect machine parts and transmit signals online to SKF’s certified Remote Diagnostic Center in Hamburg, where specialists report machinery deviations.

“They are aware of deviations and can see immediately if we have gone in to carry out any service measures on the machinery. That is a great help to us along the way. I see it as a good step in the right direction in order to achieve greater predictability, which feels good”, says Stefan.

Caption: Every 30 months the ships go into the shipyard for major maintenance work Picture caption: Sirius Shipping has a total of ten ships in its fleet.

Caption: Well-maintained ships are important to ensure that deliveries arrive on time and in an environmentally sustainable way,” comments Stefan Johansson, Technical Superintendent.

Facts about Sirus Shipping:
Ten ships in its fleet with its head office in Dons? outside Gothenburg. Shipments are undertaken in Northern Europe, primarily to ports in Norway, Finland, Denmark and Sweden.


United Kingdom >>  6/16/2022 - A consortium of Aker Solutions, Siemens Energy and Doosan Babcock has been awarded the front-end engineering and design (FEED) contract for SSE Therma...
United Kingdom >>  6/13/2022 - Anasuria Operating Company has granted Petrofac, a prominent provider of services to the global petroleum business, an Integrated Services Provider (I...

Norway >>  6/1/2022 - Aker Solutions has secured a significant[1] three-year contract extension to an existing framework agreement for work at North Sea fields operated by ...

Related Categories: Diesel Engine  Engine Parts  General  Generating Sets  Generators  Marine Diesel Engine  Power Pack  Turbines (General)  Turbines: Gas  Turbines: Hydro  Turbines: Steam 

Related Articles: Diesel Engine  Engine Parts  General  Generating Sets  Generators  Marine Diesel Engine  Power Pack  Turbines (General)  Turbines: Gas  Turbines: Hydro  Turbines: Steam 


Gulf Oil and Gas
Copyright © 2021 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.