- Emperor Energy (EMP) has purchased a license to newly acquired 3D Seismic Data covering the Judith Gas Field from global seismic company CGG.
- Emperor Energy’s consulting Geologists and Geophysicists have commenced Interpretation and Analysis of the new data.
- The new seismic data is shown to provide a major improvement in definition of seismic imagery with the potential to significantly de-risk the Greater Judith Structure for appraisal and exploration drilling.
- Amplitude response (a key hydrocarbon indicator) is shown to extend up-dip from the Judith-1 well into the Greater Judith Structure.
- Amplitude response in interpreted Kipper Gas Sands is also seen on the new seismic to extend into the Vic/P47 Exploration Permit owned 100% by Emperor Energy.
- Detailed interpretation and analysis of the Seismic Data will continue throughout April 2021.
1- New Seismic Data purchased - Interpretation and analysis commenced.
Emperor Energy is pleased to advise that it has completed a commercial agreement with global seismic company CGG for the purchase of a license to access newly acquired 3D seismic data covering the Judith Gas Field and Greater Judith Structure.
This new seismic data was acquired by CGG during 2020 as part of a multi-client 3D Seismic Survey that covered much of the Offshore Gippsland Basin including the Judith Gas Field. Seismic acquisition was carried out using state-of-the-art equipment and techniques incorporating 7000 m long acquisition cables to generate the highest quality reservoir resolution seen so far in the Gippsland Basin.
Preliminary processed 3D data which includes a MAZ merge with CGG’s previous legacy reprocessed data has been received by EMP with final processed data expected to be delivered by CGG later in 2021.
Initial examination of the new data by EMP’s consulting Geologists and Geophysicists confirms a major improvement in seismic data quality compared to previous seismic imagery providing high definition across the Judith Gas Field and much of the Greater Judith Structure. Some further improvement in data quality is expected in the final processed data volume.
High seismic amplitude (low impedance) response is used as a potential indicator of gas. Seismic sections across the Judith Gas Field indicate that high amplitude/low impedance responses are well developed in the sections correlating with the the Judith gas sands intersected in the Judith-1 well, and also in the interpreted underlying Longtom reservoirs, and can be seen extending significantly up-dip into the Greater Judith
Structure from the original Judith-1 gas discovery drilled in 1989 by Shell.
The improved seismic data quality in the new seismic volume will allow Amplitude Versus Offset (AVO)
modelling to be employed as a Direct Hydrocarbon Indicator (DHI) in these reservoir sands across the
Greater Judith Structure.
Initial examination of the new seismic also shows the presence of high amplitude responses indicative of
the possible presence of gas in interpreted Kipper Gas Sands extending from the currently producing Kipper
Gas Field (operated by Exxon Mobil) into the southeastern corner of Vic/P47. The possible extension of
the Kipper Gas Field into Vic/P47 will be assessed by future work.
Emperor Energy’s consulting Geologists and Geophysicists will continue with detailed interpretation and analysis of the seismic data throughout April and into early May. This will include redefinition of fault blocks and gas sand horizon continuity within each block, seismic correlation against the Kipper 1 and South East Longtom 1 wells along with AVO analysis to highlight potential gas reservoirs.
2. Management Comment
Emperor Energy Director Phil McNamara said: “The proximity of the Judith Gas field to the Rosedale Fault in the North had previously affected seismic data quality as you get closer to the fault resulting in poor seismic response as you progress up-dip from the Judith-1 gas discovery. The new MC3D seismic data
volume, including MAZ merge with earlier CGG legacy reprocessing, provides a major improvement in seismic definition and continuity and to a large extent overcomes this problem.
EMP has completed a project pre-feasibility study based on four production wells achieving 80 Million Standard Cubic Feet per day field production over 25 years. We now have the seismic data and tools required to accurately refine the preferred locations of these wells and what the expected total gas production could be from each.
Emperor has a very qualified team of Geologists and Geophysicists working on interpretation and analysis of the data. By mid May 2021 we will have a clearer picture of Hydrocarbon Indicators across the gas field and consider that this will greatly enhance our prospects of securing an Exploration Partner to participate
in the drilling of the Judith-2 Well. This should also provide Emperor with the confidence required to commence progressing with early-stage Government approval work identified as part of the overall Project Feasibility Study.
3. Commercial Arrangements for purchase of Seismic License
Emperor Energy and CGG have completed a binding commercial agreement for the sale and purchase of a license to access the seismic data.
The license provides Emperor Energy with access to Survey Data over and around the Judith Gas Field comprising 37km2 within Exploration Permit Vic/P47 as well as further areas outside of Vic/P47 to the west, south and east that are required to fully define the Greater Judith structure.
The cost of the license to Emperor Energy is a total of AUD $732,180.90 and will be payable via staged payments across a period of 12 months commencing in April 2021. These favourable payment terms have been factored into EMP’s cashflow and capital commitment schedule for the next 12 months.
The purchase of the Seismic License also fulfills a key condition of the approval granted on 23 December 2020 by the National Offshore Petroleum Titles Authority (NOPTA) for the "Variation and Suspension of Work Program and Extension of Permit Term: Petroleum Exploration Permit Vic/P47". This approval
extended the required timeframe to drill the Judith-2 Exploration Well to 22 August 2023.