Gulf Oil and Gas accountACCOUNT

Process Technology Licensing (33)

Engineering Services >>
ConocoPhillips Optimized Cascade Process
The ConocoPhillips Optimized Cascade® Process is designed around a "two-train-in-one" reliability concept that has been successfully proven in more th...
AP-X liquefaction Process Technology
AP-XTM LNG process offers an attractive means to significantly reduce the specific capital cost of LNG. The AP-XTM LNG process can be configured with ...
No Picture
To push the capacity of LNG trains even further, Shell has developed the three-driver Parallel Mixed Refrigerant (PMR) process, which is the basis for...
KBR Phenol
Cumene is oxidized with air at high efficiency to produce cumene hydroperoxide (CHP). CHP is then concentrated and cleaved to phenol and acetone in th...
SCORE (Selective Cracking Optimum Recovery)
Selective Cracking Optimum Recovery (SCORE™) combines the expertise and experience of KBR and ExxonMobil to offer advanced steam-cracking technology t...
Veba Combi-Cracking (VCC) Process
The Veba Combi-Cracker (VCC™) technology is a slurry phase hydrocracking/hydrogenation process for converting petroleum residues at very high conversi...
No Picture
The Stamicarbon Pool Reactor concept combines the condenser and reactor within a single pool reactor. This technology was achieved by enlarging the ho...
Orthoflow
Highlights of the technology include the compact, self-supporting Orthoflow™ converter where the disengager, stripper and regenerator vessels are effi...
No Picture
Hydrotreating is an established refinery process for reducing sulfur, nitrogen and aromatics while enhancing cetane number, density and smoke point. T...
Mixed Refrigerant LNG Process (C3MR)
The C3MR process consists of two refrigeration cycles: a propane-refrigeration cycle to cool from ambient conditions to 235° C., and MR cycle to lique...
No Picture
The Urea Training Simulator can be used for training and certification of both new and experienced operators. Other applications are in the testing, e...
ACETICA® PROCESS
The ACETICA® PROCESS, developed by Chiyoda Corporation, is a process to produce acetic acid by carbonylation of methanol. With a unique line of techno...
No Picture
KBR's Purifier™ Ammonia Process combines the following proprietary technologies to yield an extremely reliable, robust, low-energy plant:
-Mild r...
ThruPlus® Delayed Coking Technology
The ThruPlus® Delayed Coking technology is the cleanest, most cost efficient process for converting low value petroleum residues and non-conventional ...
No Picture
SMK™ coil technology for gas feed: The SMK™ technology enables selectivity optimization and to obtain very large capacity furnaces. The largest capa...
ROSE® (Residuum Oil Supercritical Extraction)
The ROSE® (Residuum Oil Supercritical Extraction) process is a very efficient solvent-extraction option for recovering higher value products from resi...
No Picture
Floating liquefied natural gas (FLNG) refers to water-based liquefied natural gas (LNG) operations employing technologies designed to enable the devel...
No Picture
The separation and fractionation systems downstream of the cracking furnaces are based on the progressive separation technology developed by Technip, ...
Hydroprocessing
Refiners are facing a dynamic business environment. Crude prices are volatile. Heavy, high-sulfur and acidic opportunity crudes are increasingly avail...
Snamprogetti Urea Technology
The Snamprogetti TM urea process is known worldwide. The process is divided into six sections:
- Synthesis and high pressure (HP) recovery
-...
No Picture
The majority of the world's LNG is liquefied in the AP-C3MRTM LNG Process, in which the precooling circuit is a propane system, typically utilizing mu...
SYDECSM (Selective Yield Delayed Coking)
SYDECSM (Selective Yield Delayed Coking) technology is the leading delayed coking technology due to its superior technical components and our knowledg...
No Picture
Double Mixed Refrigerant (DMR) process produces LNG more efficiently and increases the potential for developing natural gas resources in colder, more ...
Wet Air Oxidation (WAO) Technology
Wet air oxidation (WAO) is the process of oxidizing organic matter in the presence of liquid water. Theoretically, any substance that is capable of b...

Related News

Gulf Oil and Gas
Copyright © Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.