Efficient Prevention of Crevice Corrosion under Pipe Clamps on Stainless Steel Pipework Middle- and Long-Term Cost Savings due to Extended Service and Maintenance Intervals
Innovative Design and Materials
Compliant with the Norwegian offshore standard Norsok Z-010 (Revision 3) published in October 2000 (Section 7.3:tubing Installation)
Clamp body made of flame-retardant PPV0 plastic material (tested and V0 classified according to UL 94)
Integrated ACE anti-corrosion elastomer strips avoid the accumulation of seawater between clamp body and pipe
Drainage channels aid the dispersal of seawater High UV stability of the clamp body material; resistant against seawater, rain and oil
To be used in sub-sea and top-side environments; alleviating the requirement for two different products
Independent Testing and Approval

Salt spray tests according to ASTM B117 applied in controlled laboratory environments
Long-term field tested on a rig in the Dutch sector of the North Sea
Tests results independently assessed by Centre for Corrosion Technology at Sheffield Hallam University
Fully detailed, independent test reports available on request
Construction based on STAUFF Clamps according to DIN 3015, Parts 1 and 3 (Standard Series and Twin Series)
Tried and tested industry standard for several decades
Covering the most commonly used metric and imperial pipe diameters from 6 mm to 25,4 mm (from 1/4 inch to 1 inch)
Can be used in combination with existing mounting hardware; available ex stock from STAUFF in several stainless steel qualities
Alternative configurations and pipe diameters available on request
Installation time reduction (compared to alternative clamp designs)