The company announces its need for supply of complete vertical pump with electric Motor and base plate.
Complete vertical pump with electric motor and base plate Item : P 102 Vertical pump VS4 according to (API 610).
Scope of supply for each unit
1- Pump shall be manufactured according to (API 610) latest addition.
2- The length from base plate to the end of strainer should be (3.5) m.
3- Clear and fully informative data sheet of the pump together with the relative performance curve and a clear layout drawing with all necessary dimensions should be included within the offer.
4- Pump material should be according to API 610 table H1, material class (C6).
5- Thrust bearing shall be designed to carry the maximum thrust of the pump, developed while starting stopping or operating at any flow rate.
6- Lubrication system should be specified. If the lubrication is by grease, grease pump shall be provided (belt driven).
7- The equipment (including auxiliaries) shall be designed for uninterrupted continuous operation and outdoor installation.
8- In case of mechanical seal, it should be according to (API 682) and the seal to be from one of the following manufacturers: # JOHN CRANE --- EAGLE BURGMANN FLOWSERVE.
9- The noise levels shall not exceed 85 dB at a distance of (1m) at all four sides from the equipment.
10- Motor rating power shall be 20% more than pump rating power.
11- Standard documentation including operation maintenance manuals in English three hard copies and one CD format original .
12- Certificate of origin legalized by Iraqi embassy in the country of origin.
13- Origin :- Pump origin should be (U.S.ACanada –Australia –Italy –Switzerland AustriaFrance –Germany –Sweden-Belgium-England).
14 - Q/A (QUALITY /Assurance) inspection and testing including but not limited to the following.
-liquid penetrate inspection for casting and welding
-Non witness test for NPSH
-Hydraulic test shall be done
-Material certification required FOR:
-Casing - Impeller - Shaft
15-Test certificate for all tests carried out on equipment shall be provided within the documents.
16-Packing: Export wooden box, suitable for outdoor storage.
17- Delivery period (360 days).
18- Spare parts QTY.
- complete mechanical seal 2 Nos
- Impeller 2 Nos
- Shaft 2 Nos
-Bearing Bushing 2 Set
Service : Chemical Sewer Pumps (Continuous Flow)
Liquid : waste water
Type : API 610 - VS4
/hr Q : 60 m3
Head : 30 m
Sp. Gr. : 1.15NPSHA : submersed
Ambient Temp. : 55
RPM: 1500 or less Volt/phase/cycles 380/3/50
Explosion proof EEXD II CT4
IP : 55
Insulation Class : (F)
Temp. Rise : (B)
Ambient temp : ( -5 T0 +55 ) °C
|Bid Bond||US 3,060.00|
|Bond Validity||120 days|
|Offer Validity||120 days|
|Documents Price||ID 250,000.00|